Home > Boat, RV & Motorcycle Care > Motorcycle Products > Motorcycle Wax & Quick Detail Spray > Facts on Pre-Wax Cleaners & Polishes > Pinnacle Paintwork Cleansing Lotion
Pinnacle Paintwork Cleansing Lotion
Think of this as an anti-aging cream for your bike's paint!
Pinnacle Paintwork Cleansing Lotion will restore and preserve your motorcycle’s original beauty with a combination of gloss-enhancing oils and micro-fine fillers to polish your bike without abrasives. Simply wipe it on, allow a haze to form, and buff gently. Minor swirls and surface imperfections disappear like magic. Your motorcycle's paint finish will emerge bright and clean, ready for your favorite wax or sealant.
This is a mild polish best suited for newer motorcycles or bikes with good paint condition. It is designed to safely take off old wax, embedded road grime and pollution that washing will not remove. It prepares the surface for waxing by creating a clean, smooth, highly-reflective surface. This insures a uniform shine and maximum wax bonding.
Even though there may only be a minimal amount of paint on your motorcycle, it adds to the overall appearance of your bike. Make it look its absolute best with Pinnacle Paintwork Cleansing Lotion!
Tech Note: Paintwork Cleansing Lotion will not remove paint or clear coat finishes. Likewise, it will not remove swirls. It makes swirls less noticeable or invisible by rounding over the top edge of the swirl, robbing sunlight of a sharp edge to cause a reflection. Micro-fine fillers (1.4 micron) in the lotion then fill in the swirl. When you wax over these fillers, most swirls will disappear. These swirls may re-appear as the wax ages and may be revealed under some light conditions (Fluorescent lamps are ruthless, revealing flaws and swirls that will not show under normal sunlight.).
- Pinnacle Paintwork Cleansing Lotion is a breeze to apply by hand. For best results, apply this product out of direct sunlight. Make sure surface is cool.
- Apply a Nickel size amount of lotion to a terry applicator pad or microfiber applicator pad. Go over the surface several times. Hard rubbing is not required.
- Allow a slight haze to form. Buff off the dry film with a clean terry cloth or microfiber towel.
- After polishing, follow with Pinnacle Signature Series Wax or Souveran Wax to protect the finish with a sizzling shine!
Note: Paintwork Cleansing Lotion is not designed for use with high speed rotary polishers.