We will meet or beat anyone's pricing, shipping or promo!

Wolfgang Plastik Lens Cleaner

Wolfgang Plastik Lens CleanerPolish away scratches and haze on clouded headlights!

Who turned out the lights? Your motorcycle’s headlight may be on, but if the lens is clouded and scratched, other drivers are seeing a dull yellow glow instead a sharp beam of light. Why take any chances? Clear up your headlight lens with Wolfgang Plastik Lens Cleaner.

This cleaner is a gentle, clarifying polish for your plastic headlight lenses. It removes surface contamination and the cloudy residue that covers the lens. This haze is caused by prolonged UV exposure, so it’s not something that sits on top of the plastic. It is a condition that affects the plastic from the surface inward. Catch it early, and you can remove all of the haze so your lens covers look like new.

Wolfgang Plastik Lens Cleaner contains diminishing abrasives that blend away surface imperfections to restore clarity to your lens covers. As they work, they gradually diminish under the friction of the pad until they are completely gone. Therefore, they will not abrade the plastic. The polish is water-based and has a very low solvent content.

Wolfgang Plastik Lens Cleaner is formulated to be used with an electric drill and a 4” light cutting pad. Select the orange pad, the drill adapter, and the 2 ¾” backing plate. If using a cordless drill, use the highest setting. If using an electric drill, use the lowest setting.

If you prefer to use a polisher, select the appropriate backing plate. We recommend you work at a speed no greater than 1500 RPM with a circular polisher. If you are using a dual action polisher, set your maximum speed to 5000 OPM. Polish until the cleaner begins to dry. Buff away the residue with a microfiber towel.

Wolfgang Plastik Lens Cleaner is step one in a two part lens clarifying system. Once you’ve polished your lens covers, step two is Wolfgang Plastik Lens Glaze. The surface may be slightly rough following polishing with the yellow pad. This is normal. Wolfgang Plastik Lens Glaze is a fine finishing polish that will smooth the surface of the plastic and restore the optimum clarity to your lenses. Use it with a 4” gray pad.

For exceptional results, seal your restored lenses with Wolfgang Plastik Surface Sealant. It will lock in the shine and clarity you’ve just created, or you can apply it to a new lens to prevent future damage.

You May Also be Interested In These...