|For a Limited Time receive 2 5.5" Red Soft Wax Pads and the Porter Cable Instructional DVD FREE with your purchase of this kit! Retail Value $33.97.
Take the gentle approach to light swirl removal with XMT #2!
The Pinnacle XMT Porter Cable 7424XP Light Swirl Remover Kit erases mild paint imperfections to restore the showroom gloss to your vehicle. This kit pairs XMT swirl removers with the Porter Cable 7424XP to give you a simple, safe solution to light swirls, mild oxidation, and water spots.
If your vehicle is less than 2 years old or an older car you’ve taken great care of, the Pinnacle XMT Porter Cable 7424XP Light Swirl Remover Kit is all you need. This 3 step kit is a gentle but effective approach to light swirl removal.
Pinnacle XMT Series is the cure-all for what ails your paint finish. With sophisticated emollients and Concentrated Micro Abrasives, XMT swirl removers are the fountain of youth for your vehicle. By applying XMT Series products with the Porter Cable 7424XP, you’re giving your vehicle a gentle, rejuvenating treatment that results in smooth, vibrant paint.
This kit includes Lake Country’s CCS Dual Action 6.5 inch Smart Pads™ Foam Pads. These flat full contact buffing pads work with your dual action polisher to correct automotive paint more easily than ever before. The CCS Smart Pads™’ user-friendly features provide better control, less product waste, and a more successful detail.
The kit includes:
||Porter Cable 7424XP Variable
The Porter Cable 7424XP Dual Action Polisher is a beefed up, more powerful version of our most popular dual action polisher. The Porter Cable 7424XP Dual Action Polisher has all the user-friendly features of the original Porter Cable 7424, but a 4.5 amp motor enables enhanced performance and durability. The Porter Cable 7424XP Dual Action Polisher operates from 2,500 OPM to 6,800 OPM to provide a faster removal rate. The 7424XP features all ball and roller bearing construction with spiral/bevel gears and an improved switch design. The buffer accepts a 5/16-24 spindle thread. The pad diameter is 6 inches. The polisher includes a wrench, side handle, polishing pad, and a operating manual.
||Dual Action 5” Flex Backing
With hook facing, this plate allows you to switch pads quickly and continue
polishing. A recessed edge and flexible urethane construction gives your
paint extra protection from run-ins with the backing plate. Strict
tolerances on weight, balance, roundness, and flatness ensure consistent
performance time and time again. The backing plate has a 5/16 inch thread.
||12 oz. XMT Fine Swirl Remover
Pinnacle XMT Fine Swirl Remover is a blend of mild abrasives and
lubricating oils that remove light to moderate imperfections on aging paint
finishes. If your vehicle is not new but has no severe paint damage, this is
the swirl remover for you. It removes light to moderate imperfections like
swirls, mild scratches, and light oxidation without reducing surface gloss.
||12 oz. XMT Ultra Fine Swirl
This polish is made with such small abrasives that you can’t see them with
the naked eye. The sheer number and minute size of the abrasive particles
blend away fine flaws in the clear coat without leaving any trace of surface
marring or haze. Just like a fine jeweler’s rouge, XMT’s Concentrated
Micro Abrasives leave the paint finish glossy and smooth, just like new.
XMT Ultra Fine Swirl Remover is for like-new paint that is just starting to
show signs of age. It can also be used as a finishing polish.
||12 oz. XMT Carnauba Finishing
The gentle cleaners blend away minor flaws - like spider webbing, haziness,
and overall dullness – to increase depth and clarity. At the same time, a
layer of carnauba bonds to the paint surface to further enhance the dynamic
shine created by the glaze. What can’t be removed with the cleaners is
filled in with carnauba to create a smooth, flawless finish. It’s
perfection and protection in one! Use XMT Carnauba Finishing
Glaze as the finale to your detailing process. To increase depth and
brilliance, top the glaze with Pinnacle Signature Series II.
||1 CCS Orange 6.5 Inch Light Cutting
Firm, high density foam for scratch and defect removal. Use this pad with
polishes and swirl removers. It’s an all around pad that will work on most
light to moderate imperfections.
||1 CCS White 6.5 inch Polishing
This high absorption foam formula is intended for the application of waxes,
micro-fine polishes and sealants. This pad has very light cutting power so
it’s perfect for pre-wax cleaners.
||2 CCS Gray 6.5
Inch Finishing Foam Pads
Least abrasive. Composition is firm enough to withstand added pressure
during final finishing to remove buffer swirls. Use with machine glaze or
finishing polish. Ultra-soft and incredible for a putting on that finishing
||2 Microfiber Towels (16 x
Our microfiber towel is spun from an 80/20 polyester/polyamide blend,
producing a highly refined microfiber. The microscopic polyester/polyamide
fibers are split with a unique process that creates a “feathered” weave on
one side for buffing and looped fibers on the other side, which are
excellent for cleaning. This superior “feather” weave results in far greater
absorption properties in a virtually lint free network of fibers.
||1 Polish ‘N Wax Applicator
This two-sided applicator is an excellent tool for cutting in close around
trim and mirrors, places that your polisher can’t go. The foam applicator
has gray finishing foam on one side and orange light cutting foam on the
||12 oz. Pinnacle XMT Polishing
Foam Pad Conditioner
Prevention of dry buffing is as easy as misting an unused pad with Pinnacle
XMT Polishing Pad Conditioner. It only takes a couple of spritzes to prep
the pad for polishing. The rich lubricants instantly penetrate the pad,
softening and conditioning the material. Even if the pad has never been
used, it will glide across the paint like you’re halfway through the detail
Use the products as follows:
If your vehicle has less prominent swirls and blemishes, select XMT Porter Cable Light Swirl Remover Kit to gently remove mild imperfections and restore the showroom new luster.
- Prep pads before polishing with Pinnacle XMT Polishing Pad Conditioner. On significant swirls and flaws, apply XMT Fine Swirl Remover #2 with the orange pad. Buff after each section using one of the included microfiber towels.
- Apply XMT Ultra Fine Swirl Remover #1 with the white polishing pad. You can do an all-over polish to remove the lightest imperfections with this gentle swirl remover. Buff off residue after each section.
- Your paint should be in great shape at this point. Apply XMT Carnauba Finishing Glaze with one of the gray foam pads. Buff off the residue as you complete each section.
- Your vehicle will be glossy and reflective after applying the glaze. For the deepest shine and longer-lasting protection, use the second gray pad to apply your favorite wax. We recommend Pinnacle Signature Series II Carnauba Paste Wax for a fantastic reflection on any color.
- Clean each pad after use with Pinnacle XMT Polishing Pad Cleaner. Spray each pad generously with the cleaner and toss them in a bucket of clean water. Agitate with a Foam Conditioning Brush if necessary. Rinse well and let air dry.
XMT Porter Cable Light Swirl Remover Kit includes:
Porter Cable 7424XP Polisher
Porter Cable 7424XP Wrench
Porter Cable 7424XP Counter Weight
5 inch Dual Action Flex Backing Plate
12 oz. XMT FineSwirl Remover #2
12 oz. XMT Ultra Fine Swirl Remover #1
12 oz. Carnauba Finishing Glaze
6.5 inch CCS Orange Light Cutting Pad
6.5 inch CCS White Polishing Pad
2- 6.5 inch CCS Gray Finishing Pads
2- 16 x 16 inch Microfiber Towels
12 oz. XMT Polishing Pad Conditioner
Polish ‘N Wax Applicator
A total retail value of $297.37. SAVE $47.38!
- Additional discounts are not
- Please call for an expedited shipping
quote on this item.1-800-869-3011
|Upgrade to the
Porter Cable 7424XP Dual Action Polisher HD!
The HD model has a heavy duty 16 gauge, 25 foot power cord hardwired into the polisher. The longer cord is more convenient than an extension cord and it is gauged to deliver maximum power to the polisher for safe, efficient operation. (Standard cord is 11.5 ft.)
Select the HD model from the drop-down menu below.
Pinnacle XMT Porter Cable 7424XP Light Swirl Remover Kit FREE BONUS!
Stars based on
1st Timer - FANTASTIC!!!
August 15, 2007
Bought a new car and wanted to treat her right. Unfortunately, the dealer's detailer gave me the swirl option on my black paint, and rather than have him remove it, I did it myself. The PC 7424 along with the XMT2, XMT1 and XMT Carnuba Glaze are very easy to use. The instructional videos here at autogeek make it as easy as can be to learn. 90% of the swirls are gone. I'll do the whole process again after the summer & I'm sure the swirls will all be gone. I've used this kit on some friend's car as well and the results are simply astonishing. We've all been approached in parking lots and asked what kind of wax we use because people are really amazed at how deep the shine is. Thanx Aurogeek!