|Remove rust from threaded wheel studs in seconds.|
The Wurth Wheel Hub Cleaning Combo makes wheel maintenance a little neater by quickly removing rust and debris from the threads of the wheel hub. The Wheel Hub Cleaning Tool works with a ˝ inch impact wrench to scrub the stud clean with a coarse nylon Quick Strip Disc.
In many cases, old wheel studs can be reused; they just need a good cleaning. The Wurth Wheel Hub Cleaning Tool slips over the end of the stud to remove corrosion and brake dust in seconds. The tool fits onto a ˝ inch impact wrench, like the one you likely used to remove the lug nuts. You can also use a lug wrench or a ˝ inch drive socket wrench. Use Wurth Rost Off Extra to help you release stubborn wheel studs and clean them.
The Wurth Wheel Hub Cleaning Tool is constructed of tough plastic, which will not degrade and will not harm the threads. Five discs are included with this combo. Replacement Quick Strip Discs are available at the bottom of this page.
After the studs are cleaned, it will be easier to seat them and install wheel bolts. The next time you replace wheel components, get the Wurth Wheel Hub Cleaning Combo and make the job easier.
Tool is 3 inches long x 1 inch diameter
1 Wurth Wheel Hub Cleaning Tool
5 Wurth Quick Strip Discs
A total retail value of $39.98. Save $4.98!