There is no need to paint your boat's hull if it is protected by Nautical Liquid Glass!
Nautical Liquid Glass is non-abrasive and can be used on any fiberglass, metal, or wood boat without fear of scratching or hazing. It will not harm or remove gel or clear coat. In fact, there is no need to paint your boat's hull if it is protected by Nautical Liquid Glass! It retards barnacles, algae, and salt water erosion while reducing friction. Try it on your boat hull, as well as any other non-porous surface you wish to protect, e.g. chrome, brass, stainless steel, etc. of props, rudders, and motors.
16 oz.
How to properly use Nautical Liquid Glass®:
Before using, shake can well! The surface must be clean and dry. All wax residue on surface should be removed. We recommend the use of Liquid Glass Pre-Cleaner. Our Pre- Cleaner will ensure optimum results by prepping/cleaning dull, stained, oxidized, or previously waxed surfaces, thus enabling the Nautical Liquid Glass Polish/Finish to adhere better to the applied surface.
Apply Nautical Liquid Glass sparingly, but evenly, using a coarse cotton cloth in a straight back and forth movement. Apply one section at a time. The ideal applied surface temperature should be between 50 and 80 degrees. (If any paint color appears on the cloth, it is oxidized paint that must be removed to reveal the good paint layer beneath.) After a haze appears on the surface, wipe off with a clean, dry cloth.
For best results, allow at least four hours between coats to permit "curing." When finished, "baking" boat in the sun will bond Nautical Liquid Glass Polish/Finish to the surface. The greater the number of coats, the greater the protection afforded. Liquid Glass Wash Concentrate can be used to remove debris and refreshen between coats.
Nautical Liquid Glass Polish/Finish can be applied to any nonporous surface including aluminum, stainless steel, brass, glass, ceramic tile, etc. There are thousands of uses for business or in the home. Caution should be used, however, since a long-lasting slippery finish can be dangerous in places (for example, bath tub or shower floor). Do not use on porous surfaces such as fabrics, upholstery, leather, vinyl, etc. UNDER NO CIRCUMSTANCES SHOULD NAUTICAL LIQUID GLASS BE APPLIED TO SURFACES WHERE SOLID FOOTING AND TRACTION ARE REQUIRED.
|