Good void is filled
January 31, 2015
Overall, this is a product that will help with issues that you may have with your headlights that will re oxidize from correction that was done on headlights. What's different is the method and products used for the results. I did, however, notice that when you follow the directions of the product, that you won't get as good as a correction when you better refine the finishing steps.
For instance, for best results, I started out with 500 grit paper, to 800 grit, to 1500, to using the scotch brite pads used with the Step One cream, to, lastly using 3000 3M Trizac Pad. Lastly, I used M105 with a foam cutting pad. This showed a good polished headlight. In order to removed any leftover compound, I used a grease and wax remover.
With the UA product, I used three medium coats with about 5 mins flashing time. You will find that there's a good amount of flattening agents in the product, so, you will see a nice finish.