|Cleans foam, wool and microfiber pads|
Marine 31 Spray Polishing Pad Cleaner is a fast-acting cleaner that quickly and effortlessly removes caked-on compound, polish and wax residue from all buffing pad types. Wool, foam and microfiber pads will look and feel new after each cleaning. Marine 31 Spray Polishing Pad Cleaner features a low-foaming, easy-rinse formula that ensures no unwanted residue is left in the pad. Clean your pads with Marine 31 Spray Polishing Pad Cleaner so you can maximize your investment!
Marine 31 Spray Polishing Pad Cleaner removes all kinds of chemicals and contaminants that have been embedded into your buffing pad during the polishing process. This can include solvents, carrying agents, abrasives, petroleum distillates, silicones, chemical cleaners and worst of all, oxidized gel coat. Removing said contaminants and chemicals from your pads after each use ensures they perform like new when you use them in the future.
Cleans foam, wool, and microfiber buffing pads
Use a Foam Pad Conditioning Brush to aid in the removal of caked-on compounds and polishes
Spent residue and oxidized gel coat is a buffing pad’s worst nightmare. If you neglect to clean your pads when you’re finished compounding or polishing for the day, the chemicals in the polish combined with the oxidized gel coat will slowly eat away at the pad, affecting its integrity. When you go to use that pad in the future, there is a possibility it will fail as you’re using it, putting you at risk of running the buffer directly into the gel coat. With a few quick sprays, Marine 31 Spray Polishing Pad Cleaner removes spent residue and oxidized gel coat, leaving your pads looking and feeling new!
Marine 31 Spray Polishing Pad Cleaner is comprised of specialized cleaners that are designed to break up and dissolve compound, polish and wax residue, among the other contaminants that plague a buffing pad after polishing a boat. Marine 31 Spray Polishing Pad Cleaner rinses freely so no unwanted residue is left in the pad.
Marine 31 Spray Polishing Pad Cleaner can be used on all buffing pad types including foam, wool and microfiber.
- For best results, clean pads immediately after each use.
- Spray a liberal amount of cleaner directly onto pad and allow to dwell for 30 seconds.
- Agitate pad using appropriate wool or foam pad conditioning brush.
- Rinse thoroughly with a warm stream of water and allow pad to air-dry with the backing material facing up.
Made in USA