Meguiars D30032 DA Microfiber Correction Compound 32 oz.
Paint correction with no swirls…guaranteed.
Meguiars DA Microfiber Correction Compound is part of the Meguiars DA Microfiber Correction System. This cutting edge system allows you to correct paint with minimal prep, no sling, and absolutely no swirls! The process starts with Meguiars DA Microfiber Correction Compound, expertly formulated to remove light to moderate flaws while creating a high gloss.
Meguiars DA Microfiber Correction Compound gets it polishing power from the Super-micro abrasives. These tiny abrasives level swirls and scratches without creating new ones. Meguiars guarantees no swirls with this new system! Super-micro abrasives correct and polish the paint at the same time, so the paint is left with a smooth gloss.
Meguiars DA Microfiber Correction Compound will work well for any user. It’s formulated to perform its best when used with the Meguiars G110 Dual Action Polisher. Therefore the process is safe and easy, while still giving you excellent results.
Meguiars DA Microfiber Correction Compound does not sling and dust is minimal. Prep and clean-up are quick and easy. Plus, Meguiars DA Microfiber Correction Compound is very concentrated so a less is needed to restore a vehicle’s shine. It’s a great value!
Meguiars DA Microfiber Correction Compound is part of the Meguiars DA Microfiber Correction System. This system consists of microfiber pads and micro abrasive liquids. The microfiber pads are gentle on the paint and do a fantastic job of evenly distributing the polishes and letting the abrasives do their job. The result is smooth paint with no swirls.
The Meguiars DA Microfiber Correction System is designed for a dual action polisher! While it won’t replace Meguiars 105 and 205 for the removal of wet sanding scratches, this system will work wonders on swirls, many scratches, acid rain spots, and other mild to moderate defects on factory paint. The best part is, it’s easy! The Meguiars DA Microfiber System uses the latest Super-micro abrasive technology to give you a clean, efficient user experience.
The first step in Meguiars DA Microfiber Correction System is to use Meguiars DA Microfiber Correction Compound with Meguiars DA Microfiber Cutting Disc. You’ll love the results!
- Shake well and work in the shade on a cool surface.
- Apply product directly to Meguiar’s DA Microfiber Cutting Disc.
- Set your dual action polisher to 4800 opm. Working a 2’ x 2’ section, apply 2-3 moderate pressure passes followed with 2-3 light pressure passes.
- Wipe residue off using a soft, clean microfiber towel.
- Next use Meguiars DA Microfiber Finishing Wax for the final touch.
Items you might need
You May Also be Interested In These...
I would recommend this item to a friend.
Dont wait, get it!
October 19, 2016
D300 is my go-to product as a professional. I've worked with numerous products, brands, most of my go to products are Menzerna, a few Rupes, but Meguiars knocked it out of the park here. Using D300 is easy, and truly the only quality compound with literally no dust. It has a long workibg time, you can make 6 passes, comd back in 5 minutes to wipe and it comes right off. With 1-2 proper section passes, you can remove most . defects, best part is it finishes like a medium-finishing polish. You can pretty much use it as a 1 step if you use a mild pad. ***note photos attached, 2 sets of section passes, and 1 pass of a finishing polish yielded these results using D300, MF cuttinf dusc, speed 4.5 on Rupes, and finished with Rupes yellow pad/Menzerna 3800.
Pros:Working time, lowest dusting of compounds used, finishes like a medium-fine cut polish. Smells like Big Red chewing Gum.