|Special Offer! Receive 3 FREE Yellow All Purpose Microfiber Towels with your purchase of a Tornador. This offer is only available for a limited time!|
Clean interior and exterior surfaces with the power of air!
The BLACKFIRE Tornador Car Cleaning Gun is the easiest way to clean all automotive surfaces. The Tornador works with your air compressor to blast cleaning solution into crevices you can’t reach by hand. Clean carpet, plastics, and upholstery inside the car. Clean wheels, convertible tops, and body seams on the exterior. The Tornador Car Cleaning Gun cleans where other tools can’t!
For optimal performance, the BLACKFIRE Tornador Car Cleaning Gun works best with an air compressor that produces 5 CFM or more at 90 psi.
The patented BLACKFIRE Tornador Car Cleaning Gun tackles your most challenging detailing jobs with ease. The cone-shaped nozzle and oscillating tip create a tornado cleaning action that cleans hard and soft surfaces like nothing you’ve seen before. Dirt and grime are immediately released from fabrics, carpet, and solid surfaces.
The BLACKFIRE Tornador Car Cleaning Gun releases a fine mist of cleaning solution that does not over saturate surfaces. You’ll see the liquid turning dirty as grime is released from the surface. Wipe with a microfiber towel. Then turn the dial to shut off the water and use the compressed air to dry the cleaned area. It’s that simple.
Use the BLACKFIRE Tornador Car Cleaning Gun on the dashboard, door panels, steering wheel, fabric upholstery, carpet, floor mats, and between seats. The Tornador cleans in tough-to-reach places between seats and in seams. Because it releases so little liquid, surfaces dry quickly.
On the exterior, use the BLACKFIRE Tornador Car Cleaning Gun to clean fabric convertible tops, body seams, wheels, and emblems. There’s no need to scrub. The Tornador does the hard work for you.
The BLACKFIRE Tornador Car Cleaning Gun must be used with an air compressor capable of producing a constant air pressure of at least 60 psi. Do not to exceed 110 psi in order to protect your Tornador from unnecessary wear. Use the green valve to control the amount of liquid released by the Tornador.
To clean any surface, dilute the desired cleaner according to label’s directions. Turn the liquid valve straight up and use an overlapping motion as you pass the BLACKFIRE Tornador Car Cleaning Gun over the surface. If necessary, allow the cleaning liquid to dwell for 10-15 seconds. Use a microfiber towel to absorb excess liquid. Then turn the liquid valve off and use the compressed air to dry the cleaned area.
The BLACKFIRE Tornador Car Cleaning Gun is not a foam gun. It is an advanced cleaning gun designed to enhance the results of cleaners with a unique cyclonic cleaning action. Cleaning with the BLACKFIRE Tornador Car Cleaning Gun is easier and faster than small detailing brushes or swabs. Just spray and watch the dirt rise out of plastics, rubber, vinyl, and fabrics.
The BLACKFIRE Tornador Car Cleaning Gun includes the gun itself with the 32 oz. jar and an extra cap for the jar.
The BLACKFIRE Tornador Car Cleaning Gun is one of a kind. Clean and dry all hard-to-reach areas with the cyclonic cleaning power of the Tornador!