BLACKFIRE Leather Conditioner 2 oz.
The highest UV protection available for automotive leathers!
BLACKFIRE Leather Conditioner keeps leather soft with state-of-the-art breathable polymers. Extreme UV protection resists leather yellowing and photo oxidation. The non-slick, satin finish created by Leather Conditioner resists abrasion, arming your car’s leather seats against daily wear and tear. In addition, BLACKFIRE Leather Conditioner leaves a moisture barrier to prevent moisture from breaking down leather or stitching.
Many of the conditioners that claim to put a protective moisture barrier on the leather are not breathable. Because these products were developed a decade or more ago, they contained polymers that were greasy, slippery, shiny or actually sealed the leather's surface (preventing heat dissipation). While effective in some respects, these types of products do not meet all the requirements of leather.
BLACKFIRE Leather Conditioner provides strong UV protection for leather seats.
BLACKFIRE Leather Conditioner was developed to offer state-of-the-art UV protection plus a breathable moisture barrier that also guards against wear and abrasion. Sound like a tall order? It was, but BLACKFIRE’s chemist made it happen and now your vehicle reaps the benefits.
To resist perspiration, salt, skin oil, and lotion stains, our chemist selected a co-polymer recently developed by Dow Corning. This co-polymer cross-links with itself to provide a blanket of protection on top of the leather. It blocks moisture yet still allows air flow through the coating to facilitate heat dissipation. This co-polymer is also non-greasy, dries almost on contact to a matte finish, and isn't slippery.
For UV protection, BLACKFIRE’s chemist went all the way to Switzerland to CIBA, the maker of TINUVIN 5151. Without getting too deep, TINUVIN 5151 contains both competitive UV absorbers and hindered amine light stabilizers (HALS) to significantly retard photo-oxidative degradation. UV absorbers prevent degradation by blocking, or absorbing, UV energy. HALS stabilizers act as radical scavengers and inhibit photo-oxidative breakdown reactions. Both UV absorbers and HALS work together to provide the highest level of UV protection available in a leather dressing!
To pack the maximum amount of conditioning oils, protective polymers and UV-absorbers in the formula, it had to be a rich cream. BLACKFIRE Leather Conditioner is like applying a moisturizing lotion to your leather seats.
Bottom line, if your car, bike, boat or RV has non-perforated leather seating, BLACKFIRE Leather Conditioner is the best conditioner, UV block, and moisture barrier you can use.
- Contains TINUVIN5151 for the highest level of UV protection.
- Maintains the natural moisture balance of leather surfaces.
- Dries to the touch.
- Contains no petroleum solvents.
For best results, thoroughly clean surface first using Blackfire Interior Cleaner. Apply a dime-size amount of BLACKFIRE Leather Conditioner onto a foam or microfiber applicator and thoroughly massage into the leather. Allow lotion to penetrate for several seconds. Then lightly buff with a soft Cobra microfiber towel to remove any excess.
This product is not recommended on perforated leathers as it could clog the pores. Do not use on napped leathers such as suede.
You May Also be Interested In These...
|Related Items In This Category|
|BLACKFIRE Leather Care ComboBLACKFIRE Leather Conditioner 128 oz.BLACKFIRE Leather Kit FREE BONUS!|