We will meet or beat anyone's pricing, shipping or promo!

Lake Country 1-Pad Polishing System

Lake Country 1-Pad Polishing System

Work clean with single-use buffing pads!

How do you ensure that your buffing pads are clean? Use the Lake Country 1-Pad Polishing System and you'll never risk cross-contamination. Lake Country 1-Pads are designed for a single use. The 1-Pad Polishing System features a patented Tri-Density backing plate and curved, disposable buffing pads. Use a fresh pad with every detail!

Conventional buffing pads require cleaning after every use and they eventually wear out. After the first use, the pad will never perform like new again. Cleaning pads takes time but if you neglect this important job, you risk cross-contaminating the vehicle. The 1-Pad Polishing System is the single-use solution!

With 1-Pad buffing pads, you use a fresh, new pad every time you detail. You don't spend valuable time cleaning pads. Every 1-Pad buffing pad performs perfectly. When your detail is finished, throw the pads away. Nothing is more valuable than your time. The time you save by tossing used pads offsets the cost of the 1-Pad Polishing System.

The Lake Country 1-Pad consists of a flexible backing plate that bends against the vehicle.

The backing plate sits inside the pad.
The Tri-Density Backing Plate is made of three layers of flexible material that
provides cushioning and the ability to bend against curved panels.

The 1-Pad Polishing System consists of an ultra flexible, patented Tri-Density Backing Plate and a variety of bowl-shaped foam pads. The backing plate has a curved bottom that sits inside of the bowl-shaped 1-Pad buffing pads. The Tri-Density Backing Plate is very flexible. The cushioned backing plate is made almost entirely of flexible materials. When you transition from a flat surface to a vertical surface with your buffer, the Tri-Density Backing Plate flexes so the pad can maintain contact with the paint. Since the backing plate and pads are curved, there are no blunt edges to dig into the paint. For today's curvy vehicle styles, the 1-Pad Polishing System is a safer way to buff.


Go from flat to vertical surfaces with ease with the 1-Pad System.

Each 1-Pad uses 65% less material than most conventional foam pads. However, the system still provides plenty of cushioning. The Tri-Density Backing Plate is cushioned to provide the soft support needed, and it won't break down because the backing plate is not in direct contact with the paint.

Lake Country 1-Pads virtually center themselves! The rounded Tri-Density Backing Plate fits perfectly in each bowl-shaped pad. Hook and loop fasteners hold the pad in place. The full radius design allows you to buff safely over entire pad surface as well as buff safely on the edge of the pad. You can't do that with flat buffing pads!

The bowl shape of  the pad allows the backing plate to sit inside of it, where it is perfectly centered.
The Tri-Density Backing Plate sits inside the 1-Pad. You can polish with the entire pad, including the edges.

Use the Lake Country 1-Pad Polishing System with your professional rotary polisher.

The Lake Country 1-Pad Polishing System offers many pad options. The foam pads feature CCS (Collapsed Cell Structure) technology to evenly distribute polish over the working surface of the pad and reduce product waste. The wool pads are the same high quality as Lake Country's 8 inch wool pads.


The Lake Country 1-Pad Polishing System consists of:

The Lake Country 1-Pad backing plate flexes against your vehicle to polish curved and concave surfaces.
The Tri-Density Backing Plate bends to polish curved surfaces more effectively.


Tri-Density Backing Plate

Tri-Density Rotary Backing Plate, 6 inches - This ultra flexible, cushioned backing plate makes it easy to transition from flat to vertical panels. You've never seen a backing plate bend like this one. The Tri-Density Backing Plate is specially designed to provide added cushioning to 1-Pads. It centers itself perfectly in each bowl-shaped 1-Pad.


Twisted Wool 1-Pad

1-Pad 4 Ply 100% Twisted Wool Compounding Pad, 7 inches - Each strand of high grade wool is tightly twisted to maintain a consistent level of cut for longer periods of operation. The thick yarns remove heavy oxidation and stains from neglected or never-before-polished surfaces. The pad has 1 inch long threads.


Acrylic Wool 1-Pad

1-Pad 50/50 Wool Acrylic Polishing Pad, 7 inches - This wool pad has 50% 4 ply wool and 50% single strand wool/acrylic blend. This combination makes a light compounding/polishing wool that removes minor oxidation, haze, dullness, and spots. The 50/50 pad has 1 inch twisted threads, which are less aggressive than the shorter twisted threads found on the compounding pad.


Cyan Advanced Cutting Foam 1-Pad

1-Pad Cyan Advanced Cutting Foam Pad, 7 inches - The blue foam is designed for compounding and swirl removal. This closed cell pre-polymer foam restores oxidized and heavily swirled paint. Looks can be deceiving; the blue pad looks coarse but actually finishes with no marring. You'll achieve an almost wax-ready finish in one step.


Yellow Cutting Foam 1-Pad

1-Pad Yellow Cutting Foam Pad, 7 inches- Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches. It should only be used on oxidized and older finishes. Always follow this pad with a less aggressive pad and a fine polish to refine the paint until it is smooth.


Orange light cutting 1-pad

1-Pad Orange Light Cutting Foam Pad, 7 inches- The orange pad is made of firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It's a multi-purpose pad that will work on most light to moderate imperfections.


Tangerine Ultra Polishing 1-Pad

1-Pad Tangerine Ultra Polishing Foam Pad, 7 inches - The tangerine foam is made for light to moderate defect removal and polishing. It has the cutting power just below that of the Lake Country orange light cutting pad, and the tangerine pad leaves a finish like you'd achieve with a black finishing pad.


Black Finishing Foam 1-Pad 1-Pad Black Finishing Foam Pad, 7 inches- The black pad's composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

Benefits & Features of the 1-Pad Polishing System:

  • Patented Tri-Density Flexible Backing Plate
  • Form fitting pads are self-centering. Simply align, press and buff!
  • Tri-density cushion backing plate maintains consistent cushion feel, won�t break down with use like conventional pads.
  • Full radius design allows user to buff safely over entire pad surface as well as buff safely on edge.
  • 1-Pad use 65% less material than most conventional buffing pads.
  • Pad shape allows easy transition from flat to vertical surfaces.

You May Also be Interested In These...

McKee's 37 Polishing Pad Rejuvenator
Our Price: $24.99, 2/$39.99
(31 Reviews)
Microfiber Towel Combo
Retail Value $75.90
Our Price $49.99
(7 Reviews)